Console Operation; Operation Of Your Console; Getting Started - Spirit XT485 Owner's Manual

OPERATION OF YOUR CONSOLE

GETTING FAMILIAR WITH THE CONTROL PANEL
CONSOLE

GETTING STARTED

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the
power switch located at the front of the treadmill below the motor cover. Ensure that
the safety key is installed, as the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time.
Then the Time and Distance windows will display Odometer readings for a short time.
The Time window will show how many hours the treadmill has been in use and the
Distance window will show how many miles (or Kilometers if the treadmill is set to
metric readings) the treadmill has gone. Then a message in the message center will
show the current software version. The treadmill will then enter idle mode, which is
the starting point for operation.
15