Introduction; The Phone - ASCOM Eurit 25 User Manual

Introduction

The phone

Connection type Connection type
Connection type Connection type Connection type
Your phone is designed for use with an ISDN basic access (DSS1 protocol, Euro-ISDN) and can
be operated on your subscriber connection (NT+2ab), an ISDN bus (S-Bus) or connected to a
PBX. The phone is powered via the NT+2ab power supply or the PBX. In the event of a power
failure, a backup supply powers the phone via the local exchange (for PBX operation, refer to
the PBX documentation).
User concept User concept User concept User concept User concept
Every user can define his or her own settings. Separate call charges are recorded for each user
(for details on the user concept, see »User concept« in the section on »Telephoning«).
Advanced features Advanced features Advanced features Advanced features Advanced features
Your dynamically managed phonebook can store up to 40 numbers.
Four speed dial keys, each for two numbers, allow you to dial numbers simply by pressing a key.
A wide range of user-friendly features make your new phone easy to operate and enhances
calling comfort. For a summary of these features, see the contents list.
5 5 5 5 5