Manual Dialling - ASCOM Eurit 25 User Manual

Telephoning

Manual dialling

Manual dialling Manual dialling
Manual dialling Manual dialling
If only one user is assigned to your Ascom Eurit 25 or if your code is already displayed,
there is no need to press the user key before making a call.
Direct dialling (off-hook dialling) Direct dialling (off-hook dialling)
Direct dialling (off-hook dialling) Direct dialling (off-hook dialling) Direct dialling (off-hook dialling)
Select the user.
Lift the handset.
Enter the number with prefix. The phone immediately begins dialling. Wait for
the connection and make your call.
Replace the handset to terminate the call.
Dialling preparation (on-hook dialling) Dialling preparation (on-hook dialling) Dialling preparation (on-hook dialling)
Dialling preparation (on-hook dialling) Dialling preparation (on-hook dialling)
Select the user.
Enter the number with prefix. If you have entered a wrong number, see
instructions below.
Lift the handset. The phone dials the number entered. Wait for the connection
and make your call.
Replace the handset to terminate the call.
For both dialling modes: If you make a call while a user code other than your own is
displayed, the call is made with the displayed user's attributes and at his cost.
On-hook dialling only: If you have entered a number incorrectly, press the left arrow key
(<) until the cursor reaches the error. Press the right key to overwrite the incorrect
number. To delete an individual number, press the clear key (DEL). Use the right arrow key
to go to the end of your entry.
17 17 17 17 17