Pentax Q10 Operating Manual page 139

Saving a Thumbnail Image to the USER Mode
If you take an image that you like, you can save the image along with the
settings used in that image to make it even easier to replicate the look of
the image.
1
Select from USER 1 to 3 to which settings were saved on
the screen in Step 2 on p.136.
2
Press the d/i button.
The save confirmation screen appears.
3
Use the four-way controller (23) to select [Save
Thumbnail], and press the 4 button.
The image selection screen appears.
4
Turn the e-dial to choose an
image.
You can select from any of the captured
images.
5
Use the four-way controller (23) to select [Save], and
press the 4 button.
The image is saved and displayed in the
image list.
Saves selected image as Saves selected image as
thumbnail for USER 1 thumbnail for USER 1
Save Save
Cancel Cancel
MENU
USER 1 USER 1
USER Mode Manager USER Mode Manager
MENU Cancel Cancel
137
5
100-0001 100-0001
OK OK
OK
OK OK OK