Pentax Q10 Operating Manual page 187

Setting the Capture Mode Display Method
Sets the monitor display method in Capture mode.
1
Select [LCD View Options] in the [A Rec. Mode 3] menu,
and press the four-way controller (5).
The [LCD View Options] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select a grid display
type, and press the 4 button.
Select from h (default setting), e (4x4
Grid), f (Golden Section) or
g (Scale).
3
Use the four-way controller (23) to select [Histogram] or
[Bright/Dark Area], and use the four-way controller (45)
to select O or P.
Histogram
Bright/Dark Area
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Setting the Guide Display Time
Set the length of time that the guides (p.67) are displayed on the monitor
when the Capture mode is changed.
Select from [3 sec.] (default setting), [10 sec.], [30 sec.] and [Off].
Set in [Guide Display] of the [R Set-up 1] menu.
Shows the brightness distribution of an image. (p.26)
Bright (overexposed) portions blink red and dark
(underexposed) portions blink yellow. (p.28)
LCD View Options LCD View Options
Show Grid Show Grid
Histogram Histogram
Bright/Dark Area Bright/Dark Area
Cancel Cancel
MENU
185
OK OK
OK
8