Pentax Q10 Operating Manual page 106

104
3
Use the four-way controller (23)
to select the number of shots,
and press the 4 button.
Select from 2 to 9 shots.
4
Use the four-way controller (23) to select [Auto EV
Adjustment], and use the four-way controller (45) to
select O or P.
When set to O (On), the exposure is adjusted automatically according to
the number of shots.
4
5
Use the four-way controller (23) to select [Start
Shooting], and press the 4 button.
The camera is ready to take a series of interval pictures.
6
Press the shutter release button halfway.
The autofocus system operates.
7
Press the shutter release button fully.
The composite picture is displayed in Instant Review each time the
shutter release button is pressed.
The following operations can be performed during Instant Review.
Available operations
d/i button
3 button
When the above operations are performed or after the set number of
shots are taken, the screen in Step 3 appears again.
8
Press the 3 button twice.
Multi-exposure is ended.
Discards pictures taken up to that point and takes pictures
again from the first frame.
Saves pictures taken up to that point and cancels shooting.
Multi-exposure Multi-exposure
Start Shooting Start Shooting
Number of Shots Number of Shots
Auto EV Adjustment Auto EV Adjustment
Cancel Cancel
MENU
2 2 times times
OK OK
OK