Pentax Q10 Operating Manual page 102

Table of Contents

Advertisement

100
4
Press the shutter release button halfway.
The autofocus system operates.
5
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully
pressed. Take your finger off the shutter release button to stop.
• The drive mode is fixed to g when the capture mode is set to \ (Moving
Object)/Z (Pet)/R (Kids) of H (Scene) mode.
• The focus position is locked in the first frame.
• If [File Format] is changed to [RAW] or [RAW+] while g is selected, the
shooting mode is temporarily changed to h.
4
• The shutter cannot be released until charging is complete when using the
built-in flash. You can set the camera to enable the shutter release before the
built-in flash is ready in [11. Release While Charging] of the [A Custom
Setting 2] menu.
• Select a mode other than g or h in the Drive Mode setting screen to cancel
the continuous shooting. The setting is canceled when the camera is turned
off if [Drive Mode] is set to P (Off) in [Memory] of the [A Rec. Mode 3] menu.
(p.189)

Advertisement

Table of Contents
loading

Table of Contents