Pentax Q10 Operating Manual page 230

228
Problem
Autofocus does
not work
The focus
cannot be
locked
The AE Lock
function does
not operate
The built-in
flash does not
discharge
The USB
connection with
a computer
does not work
11
properly
Cause
The subject is too
close
The focus method
is set to \
[Autofocus Method]
is set to [Face
Detection] or
[Tracking]
The capture mode
is set to \, , Z
,
l
R or n of H
mode.
The shutter speed
is set to h
When the flash
mode is set to C or
C , the flash will
not discharge if the
subject is bright
The capture mode
is set to K, d,
A, Z, p, y,
U, n or E of H
mode
The USB
connection mode is
set to [PTP]
Remedy
Move away from the subject and take a
picture.
Set [Focus Method] to =. (p.84)
Autofocus is not locked (focus lock) when
[Autofocus Method] is set to [Face
Detection] or [Tracking]. The camera will
continue focusing on the subject while the
shutter release button is pressed halfway.
If there is a subject that you want to focus
on, set [Autofocus Method] to [AF Select
(25 Points)], [Select], or [Spot], and use
the focus lock. (p.89)
Set the capture mode to any mode other
than \ (Moving Object),
Z (Pet) R (Kids) or n (Stage Lighting)
,
of H (Scene) mode. (p.70)
Set the shutter speed to any mode other
than h. (p.76)
Set the flash mode to b (Flash On) or D
(Flash On+Red-eye Reduction). (p.55)
Set H (Scene) mode to any mode other
than K (Sunset), d (Blue Sky), A
(Night Scene), Z (Night Scene HDR),
p (HDR), y (Backlight Silhouette),
U (Candlelight), n (Stage Lighting) or
E (Museum). (p.70)
Set [USB Connection] in the [R Set-up 2]
menu to [MSC]. (p.201)
(Night Snap),
l