Table of Contents
Advertisement
FRONT PANEL DESCRIPTIONS
1
Main LCD Display
This display will show pertinent status information and will be used to make
adjustments to features in the Menu System.
2
Left Cursor Button
This button is used to navigate the Menu System and change settings
by moving the cursor to the left.
3
Enter Button
This button is used to accept and save a current setting in the Menu
System.
4
Up Button
This button is used to navigate the Menu System and change settings
by moving the cursor up. This button is also used for increasing the
audio volume in the Status Screen (see page 13).
5
Right Cursor Button
This button is used to navigate the Menu System and change settings
by moving the cursor to the right.
6
Down Button
This button is used to navigate the Menu System and change settings
by moving the cursor down. This button is also used for decreasing the
audio volume in the Status Screen (see page 13).
7
Input Button
Selects between analog L/R, S/PDIF, or TOSLINK audio input.
8
Menu Button
This button will activate the Menu System which allows changes to
audio output.
9
Bypass Button
Press the Bypass button to disable Dolby Volume processing.
10 Mute Button
This button will cycle between Mute-On and Mute-Off modes. When the
Mute-On mode is enabled, all audio output is disabled.
11 Standby Button
Press the Standby button to place the unit in Standby Mode. Standby
Mode is an energy-saving state where less than 1W of power is consumed
when the product is not in use.
5
Advertisement
Table of Contents
