Installing The Int3000; Selecting The Location; Connecting The Telephone Cord; Connecting The Ac Adapters - Inter-Tel INT3000 User Manual

Hide thumbs Also See for INT3000:

Table of Contents

NSTALLING THE

Select a location for the INT3000 that avoids excessive heat or humidity. The Base

Unit of your INT3000 can be placed on a desk or tabletop near a standard 120V AC

outlet and telephone line jack. The Base Unit can also be mounted on a standard wall

plate using the Wall Mount Adapter. Keep the Base Unit and Handset away from

sources of electrical noise (motors, fluorescent lighting, computers).

Before using your INT3000, be sure to raise the antenna to the vertical position.

Connect the telephone cord to the jack on the back of the Base Unit and the other end

to the telephone jack, as shown below.

The smaller AC Adapter, with the yellow ring on the connector, connects to the yel-

low jack on the back of the Battery Charger. The other AC Adapter connects to the

back of the Base Unit, as shown below.

The AC Adapters are equipped with a polarized line plug (a plug having one blade

wider than the other). This plug will fit into the power outlet only one way. If you are

unable to insert the plug fully into the outlet, try reversing the plug. If you cannot plug

the AC Adapter into the outlet, contact an electrician about replacing the outlet.

NOTE:

Route the power cord where it will not create a trip hazard, or where it could

become worn and create a fire or other electrical hazard.

INT3000 Cordless Telephone User Guide

INT3000

AC Adapter

Base Unit

To Telephone Jack

Table of Contents