Table of Contents
Advertisement
S
-
-
TATION
TO
STATION
Leaving Messages
If you call a phone that is busy, does not answer, or is in do-not-disturb, you can use
the station-to-station messaging feature to let the other person know you called.
To signal that a message is waiting, a called phone's MSG key flashes and the display
shows the number of waiting messages.
If You Do Not Have a MSG Key
To leave a message:
If you call a phone that is busy, does not answer, or is in do-not-disturb, and want
1.
to leave a message, hang up.
Then dial
2.
To cancel a message that you left at another phone:
Dial
1.
3
Dial the extension number of the phone where you left the message.
2.
If You Have a MSG Key
If you have a MSG key, there are two messaging options:
•
Have the called party return your call. When the party you called responds to
the message indication, a call is automatically placed to your phone.
•
Leave a message with the called party's message center. When the party you
called responds to the message indication, a call is automatically placed to his or
her message center instead of your phone. Sometimes the Voice Mail system is
programmed as the message center.
To leave a message while on an intercom call:
After calling the extension where you want to leave the message, press your
1.
MSG key.
Press
2.
To cancel a message that you left at another phone:
Dial
1.
3
Dial the extension number of the phone where you left the message.
2.
INT3000 Cordless Telephone User Guide
M
ESSAGES
and dial the desired extension number.
3
6
7
.
6
6
to hang up or wait for the message center to answer.
talk
.
6
6
29
Advertisement
Table of Contents
