Programming Access Codes - Paradox Esprit+ 642 User Manual

3.3 Programming Access Codes

How Do I Create an Access Code?
The Master Code or User Code 01 must be used to enter
programming mode in order to create access codes.
1) Press the
enter code to programming mode.
2) Enter the
create access codes. The display will read:
Programming mode section.
3) Enter a two digit code number (00 to 48). The display
will read: programming in process. This
message remains until you have entered a valid
access code.
4) Enter a four- or six-digit access code. A valid entry will
return the programming mode section
message.
5) Return to step 3 to include additional entries or press
to exit.
[ ]
CLEAR
The display will read: none to indicate that an
access code is available (does not contain
information).
key. The display will briefly read:
[ ]
ENTER
[
MASTER CODE
or
] [
USER CODE
in order to
01]
Esprit+ 642 LCD Keypad 9