Table of Contents
Advertisement
UA88382 USB Interface Option Card
This option card supports the connection of (1) USB interface cable for use with UPSilon remote monitoring,
management and unattended O/S shutdown software.
Pin 1 - VCC (+5V)
1
2
Pin 2 - D-
Pin 3 - D+
4
3
Pin 4 - Ground
UA88374-FN Dry Contact Interface Option Card
This card provides dry contact closure signals for UPS on bypass, utility normal, inverter on, low
battery, abnormal battery, UPS summary alarm. It also provides EPO and remote UPS shutdown capability.
1
USHA SNMP/HTTP Agent Option Card
Now you can monitor and manage your Falcon
Electric FN Series UPS across an Ethernet LAN, WAN,
Enterprise Network or via the World Wide Web. With
our Universal SNMP/HTTP Agent board (USHA),
remote management is easy using a standard web
browser or Network Management Software (NMS).
Remote SNMP/HTTP UPS management is a simple
matter of inserting our USHA board into the designated
option port provided on the rear panel of every FN
Series UPS.
The USHA board is supplied with a SNMP UPS MIB II
compliant "snap-in" Management Information Base
(MIB). The MIB is compatible with HP OpenView and
other Network Management Software (NMS).
Remote server and computer shutdown client software is also provided. The software supports the shutdown of multiple
servers or computers "in-band" across any Ethernet LAN. The client software may be installed on as many systems as
required and supports most MS Windows and server platforms, in addition to LINUX.
Pin 1 - REPO 1
Pin 2 - REPO2
2
3
4
5
6
CN1
1
2
Pin 1 - UPS on Bypass
Pin 2 - Utility Abnormal
8
9 10
7
Pin 3 - Utility Normal
Pin 4 - Inverter On
Pin 5 - Low Battery
Pin 6 - Abnormal Battery
Pin 7 - UPS Summary Alarm
Pin 8 - Common
Pin 9 - Shutdown UPS (+) SIgnal
Pin 10 - Shutdown UPS (-) Signal
Shutdown function will be activated after a 6-
25Vdc voltage is applied across pins 9 and
10. The UPS will shutdown after about 5 sec-
onds.
37
N.O.
N.O.
N.C.
N.C.
N.O.
N.O.
N.O.
Advertisement
Table of Contents
