Grizzly G0460/G0461 Owner's Manual page 8

Figure 2. Fence controls.
K. Rip Fence Lock Handle: Secures the fence
face on its forward/backward slide track.
L. Micro-Adjust Knob: Precisely adjusts the
fence.
M. Rip Fence Scale: Allows precise measure-
ment of rip cutting operations.
N. Fence Face: The surface that the workpiece
slides along.
O. Fence Body: Guides the fence along the rail
and supports the fence face.
P. Rip Fence Body Lock Lever: Secures the
fence body in position along the fence rail.
-6-
Q. Riving Knife: Maintains kerf opening during
cutting operations. This function is crucial to
preventing kickback caused by the kerf clos-
ing behind the blade.
R. Main Blade (Not Included): Performs the cut-
ting operations.
S. Scoring Blade (Not Included): Small cutting
blade that rotates opposite the main saw
blade. The blade scores the workpiece before
the actual cutting operation is performed, thus
preventing tear-out in laminate materials. The
scoring blade is adjustable left and right, up
and down, and in kerf thickness.
T. Scoring Blade Vertical Adjustment Socket:
Internal cap screw adjusts the height of the
scoring blade.
U. Scoring Blade Horizontal Adjustment
Socket: Internal cap screw adjusts the hori-
zontal position of the scoring blade in relation
to the main blade.
V. Scoring Blade Lock Socket: Locks the
scoring blade adjustments.
W. Lower Blade Guard: Reduces the risk of
accidental operator contact with the blade
when the table is at its full extension.
G0460/G0461 12" Sliding Table Saw