Section 3: Setup; Setup Safety; Unpacking; Items Needed For Setup - Grizzly G0460/G0461 Owner's Manual

Setup Safety

This
serious
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and operations
before starting the machine!
Wear safety glasses during
the entire setup process!
The Model G0460/G0461
is a very heavy machine.
Serious personal injury
may occur if safe mov-
ing methods are not fol-
lowed. To be safe, get
assistance
power equipment when
moving the crate and
removing the machine
from the crate.
Unsupervised children and
visitors inside your shop
could cause serious per-
sonal injury to themselves.
Lock all entrances to the
shop when you are away and
DO NOT allow unsupervised
children or visitors in your
shop at any time!
G0460/G0461 12" Sliding Table Saw

SECTION 3: SETUP

machine presents
injury hazards
and use

Unpacking

The Model G0460/G0461 was carefully packed
when it left our warehouse. If you discover the
machine is damaged after you have signed
for delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory the
contents.
Items Needed for
Setup
The following items are needed to complete the
setup, but are not included with your machine:
Description
• Safety Glasses (for each person) .............. 1
• Forklift or Other Power Lifting Equipment .. 1
• Lifting Straps (1500 lb capacity) ................. 2
• An Assistant to Help with Heavy Items ...... 1
• Main Blade 12" (305mm) ........................... 1
• Scoring Blade 3" (80mm) ........................... 1
• High Quality Straightedge .......................... 1
• Phillips Head Screwdriver .......................... 1
• Machinist's Square ..................................... 1
• Framing Square .......................................... 1
• Dust Collection System .............................. 1
• 5" Dust Hose and Hose Clamps ................ 1
• 2½" Dust Hose and Hose Clamps ............. 1
Qty
-15-