[P-3] Installing The Optional Speakers - Mitsubishi Electric MDT55IS User Manual

P-3 Installing the optional speakers
Before making connections
• Optional speakers can be installed.
• Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure.
How to install the optional speakers
1. Install the optional speakers on the monitor.
Use the metal fi ttings and screws supplied with the optional speakers.
2. Insert the left speaker cable into the SPEAKER (S) terminal (L) on the monitor, and insert the right speaker cable into the
SPEAKER (S) terminal (R).
NOTE:
Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.
Red(+)/Black(-)
To speaker terminal (R)
NOTE:
Switch the built-in speaker mode to the optional speaker mode after you power on the monitor.
See the page for How to Use (on page 31) for further details.
CAUTION:
Do not move the monitor with the speakers installed.
The monitor and the speakers may be damaged and you may be injured if the monitor falls.
Right speaker
SPEAKER (S)(R)
Red(+)
Black(-)
English-17
Red(+)/Black(-)
To speaker terminal (L)
SPEAKER (S)(L)
Red(+)
Black(-)
Carry out as necessary
Left speaker