Installing The Optional Speakers - Mitsubishi Electric MTD701S User Manual

Lcd display monitor
Table of Contents

Advertisement

P-3

Installing the optional speakers

How to install the optional speakers
1. Install the optional speakers on the monitor.
Use the metal fi ttings and screws supplied with the optional speakers.
Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure.
2. Insert the left speaker cable into the SPEAKER (S)(L) on the monitor, and insert the right speaker cable into the SPEAKER (S)(R).
NOTE:
Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.
NOTE:
Switch the built-in speaker mode to the optional speaker mode after you power on the monitor.
See the page for How to Use (on page 30) for further details.
CAUTION:
Don't hold the speakers when moving the monitor.
The monitor and the speakers may be damaged and you may be injured if the monitor falls.
Right speaker
(option)
Black(-)
SPEAKER (S)(L)
Red(+)
Black(-)
SPEAKER (S)(R)
Red(+)
English-17
Carry out as necessary
Left speaker
(option)
To speaker terminal (L)
To speaker terminal (R)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A3112

Table of Contents