[P-3] Installing The Optional Speakers; Carry Out As Necessary; Installing The Optional Speakers - Mitsubishi Electric MDT65IS User Manual

P-3

Installing the optional speakers

Before connecting the signal cable to PC and Video
• Optional speakers can be installed.
• Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure.
How to install the optional speakers
1. Use the metal fi ttings and screws supplied with the optional speakers.
For the installation procedure, see the setup guide of the speakers.
2. Insert the left speaker cable into the SPEAKER (S) terminal (L) on the monitor, and insert the right speaker cable into the
SPEAKER (S) terminal (R).
Left speaker
Red(+)/Black(-)
To speaker terminal (L)
NOTE:
Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.
CAUTION:
Do not move the monitor with the speakers installed.
The monitor and the speakers may be damaged and you may be injured if the monitor falls.
SPEAKER (S)(L) SPEAKER (S)(R)
Black(-) Black(-)
Red(+) Red(+)
English-17

Carry out as necessary

Right speaker
Red(+)/Black(-)
To speaker terminal (R)