[P-3] Installing The Optional Speakers; Carry Out As Necessary; Installing The Optional Speakers - Mitsubishi Electric LDT55IV User Manual

P-3

Installing the optional speakers

Before connecting the signal cable to PC and Video
• Optional speakers can be installed.
• Please refer to Quick Setup Guide of the optional speakers for the detailed installation procedure.
How to install the optional speakers
1. Use the metal fi ttings and screws supplied with the optional speakers.
For the installation procedure, see the setup guide of the speakers.
2. Insert the left speaker cable into the SPEAKER (S) terminal (L) on the monitor, and insert the right speaker cable into the
SPEAKER (S) terminal (R).
NOTE:
Match the polarity of the speaker cables and that of the terminals (+ (red)/- (black)).
Unmatched polarity may cause problems with audio output.
Red(+)/Black(-)
To speaker terminal (R)
NOTE:
Switch the built-in speaker mode to the optional speaker mode after you power on the monitor.
See the page for How to Use (on page 28) for further details.
CAUTION:
Do not move the monitor with the speakers installed.
The monitor and the speakers may be damaged and you may be injured if the monitor falls.
Right speaker
SPEAKER (S)(R)
Red(+)
Black(-)
SPEAKER (S)(L)
Red(+)
Black(-)
English-16

Carry out as necessary

Left speaker
Red(+)/Black(-)
To speaker terminal (L)