Add-On Modules / Upgrading; Installing The Processor(S) - Fujitsu Siemens Computers D1818 Technical Manual

Add-on modules / Upgrading

Installing the Processor(s)

The mainboard D1818 supports the latest 64-bit processor technologies from AMD. Only AMD
™
Opteron processor 200 series are certified and supported with this motherboard.
If using a single processor, it MUST be installed in socket CPU0. When using a single
i
processor only CPU0 memory banks are addressable.
There must be used identical processors for CPU0 and CPU1.
Fujitsu Siemens Computers is not liable for damage as a result of operating an unsupported
configuration.
The diagram is provided as a visual guide to help you install socket processors and may not be an
exact representation of the processors you have.
► Lift the lever on the socket until it is approximately 90
► Align the processor with the socket. There are keyed pins underneath the processor to ensure
that the processor is installed correctly.
► Seat the processor firmly into the socket by gently pressing down until the processor sits flush
with the socket.
► Place the socket lever back down until it locks into place.
Your processor is installed.
Repeat these steps for the second processor if you are using two processors.
A26361-D1818-Z120-1-7619, edition 1
Add-on modules / Upgrading
o
or as far back as possible to the socket.
15