Drivers - Fujitsu Siemens Computers D1627 Technical Manual

Drivers

Microcode update under DOS with bootable microcode update floppy disk - brief description
► Download the update file from out website to your PC.
► Insert an empty floppy disk (1.44 MB).
► Run the update file under DOS (e.g. 1627101.EXE ).
► A bootable update floppy disk is created. Leave the floppy disk in the drive.
► Restart the PC.
► Follow the instructions on screen.
To determine whether the latest microcode update has been loaded, the so-called Patch-ID of the
processor can be read out.
► Press the F1 key in the BIOS Setup .
The entry CPU / Patch ID is shown on the displayed information page.
A list with the current processors and the related Patch-IDs is available on the Internet.
If the processor is not recognised, you also require the microcode update tool for
i
processors of the P6 family.
Drivers
Only when no drivers are installed on your system, or you want to update these, proceed as follows:
► Insert the CD "Drivers & Utilities Collection" into the CD-ROM drive.
► If the CD does not start automatically, run the START.EXE programme in the main directory of
the CD.
► Select DeskUpdate - Fully automatic installation .
► Follow the instructions on screen.
30 - English A26361-D1627-Z121-1-6319