Table of Contents
Advertisement
CHAPTER 3
PM Control by APM
No
Yes
Note :Enable this for O.S. with APM like Windows
Video Off Option
The settings are N/A, Standby, Doze, or Suspend. This option is for
choosing the setting in which the monitor will turn off.
N/A
Always turn on.
Doze
During Doze mode, the monitor will be turned off.
Standby During Standby mode, the monitor will be turned off.
Suspend During Suspend mode, the monitor will be turned off.
The default setting is Standby.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to
Blank Screen
DPMS (default)
Modem Use IRQ
This determines the IRQ in which the MODEM can use.
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system
to enter the Soft-Off state. The settings are: Delay 4 Sec, Instant-Off.
System BIOS will ignore APM when
power managing the system.
System BIOS will wait for APM's
prompt before it enter any PM mode
®
turn off the vertical and horizontal synchroniza
tion ports and write blanks to the video buffer.
This option only writes blanks to the video
buffer.
Initial display power management signaling.
3-23
AWARD
BIOS SETUP
®
®
98, Windows
NT, etc.
Hide quick links:
Advertisement
Table of Contents
