MSI MS-6340 Technical Manual page 15

CHAPTER 2 HARDWARE INSTALLATION
2.4-1 Power Switch
Connect to a 2-pin push button switch.
2.4-2 Reset Switch
Reset switch is used to reboot the system rather than turning the power ON/
OFF. Avoid rebooting while the HDD LED is lit. You can connect the Reset
switch from the system case to this pin.
2.4-3 Power LED
The Power LED is lit while the system power is on. Connect the Power LED
from the system case to this pin.
3 pin single color LED connect to pin 4, 5, & 6. This LED will lit
when the system is on.
2.4-4 Speaker
Speaker from the system case is connected to this pin.
2.4-5 HDD LED
HDD LED shows the activity of a hard disk drive. Avoid turning the power
off while the HDD led is lit. You can connect the HDD LED from the system
case to this pin.
2 - 9