Removing The Power Button Module; Prerequisites; Procedure - Dell XPS 8700 Owner's Manual

Removing the Power Button Module

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Prerequisites

1 Remove the computer cover. See "Removing the Computer Cover" on page 15.
2 Remove the front bezel. See "Removing the Front Bezel" on page 21.
3 Remove the top cover. See "Removing the Top Cover" on page 47.

Procedure

1 Disconnect the power button module cable from the system board connector
F_PANEL. See "System-Board Components" on page 13.
2 Press the tabs on the power button module and lift the power button module to
release it from the top panel.
Removing the Power Button Module
57
|