Removing The Power-Button Module; Prerequisites; Procedure - Dell D14S Service Manual

Removing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the
3 Follow the procedure from step 1 to step 5 in

Procedure

1 Disconnect the power-button cable from the system board.
2 Using a plastic scribe, press down the clip on top of the power-button
module to release it from the chassis.
3 Using a plastic scribe, press the clip at the bottom of the power-button
module upward.
60
computer. After working inside your
computer cover.
front bezel.
After working inside your
"Removing the drive cage".