Removing The Power-Button Module; Prerequisites; Procedure - Dell XPS 8920 Service Manual

Removing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1 Remove the right-side
2 Remove the top
3 Remove the front

Procedure

NOTE: Note the routing of the cable as you remove it so that you can
reroute it correctly after you replace the power-button module.
1 Disconnect the power-button module cable from the system board.
For more information, see
2 Note the power-button module cable routing and remove the cable from the
routing guides next to the system board on the chassis.
3 Remove the screw that secures the power-button module and lift the power-
button module from the chassis.
82
computer. After working inside your computer, follow
After working inside your
cover.
cover.
bezel.
"System-board
computer. For more safety best
components".
Before
www.dell.com/