Removing The Power-Button Module; Prerequisites; Procedure - Dell Inspiron 3470 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1 Remove the computer cover.
2 Remove the front bezel.
3 Follow the procedure from step 1 to step 6 in
Procedure
1 Remove the screw (#6-32xL6.35) that secures the front-I/O bracket to the chassis.
2 Gently release the ports on the front-I/O bracket from the slots on the chassis and lift the front-I/O bracket off the chassis.
3 Disconnect the power-button cable from the system board.
4 Press the tabs on the power-button module to release the module from the front panel.

Removing the power-button module

computer. After working inside your computer, follow the instructions in
"Removing the optical
www.dell.com/
drive".
Removing the power-button module
26
After working inside
47