Procedure
1
Remove the screw that secures the card-retention bracket to the chassis.
2
Lift the card-retention bracket and set it aside in a secure location.
NOTE: Your graphics card may have power-cable connectors.
3
Press the releasing clips on the power-cable connectors and disconnect the power
cable from the graphics card, if applicable.
1
power cable
3
card-retention bracket
4
Locate the graphics card (PCI-Express x16 card) on the system board.
See "System-Board Components" on page 13.
NOTE: The appearence of the securing tab may be different on your
computer.
1
2
3
2
screw
Removing the Graphics Card
27
|