Franklin TES-120 Operation Manual page 54

3. Enter a password of up to four characters and then
press .
ENTER
4. Enter the password again and then press
• Once you set the password, the unit will ask the
password in the Data Bank mode or the Expense
Manager mode.
• Be sure to write down your Password. Without it,
there is NO way to review the confidential data.
Changing a Password
1. Select "Password..." and then press
2. Select "Set" and then press
3. Enter the old password and then press
4. Enter a new password of up to four characters and
then press
ENTER
5. Enter the password again and then press
.
ENTER
.
.
ENTER
.
ENTER
.
ENTER
.
ENTER
52
Enter New Password.
* * * *
Confirm Password.
* * * *
Password Enabled.
Enter Old Password.
* * * *