Playback Monitoring - BeachTek DXA-SLR PURE Operating Manual

Playback Monitoring

To monitor audio from the camera during playback you will need to use
the AV cable that came with the camera and AV cable that came with
the adapter. Be sure to keep the output cable connected between the
camera and adapter which supplies the needed ground path for the
signal through the AV cable.
1) Plug the adapter AV cable into the MONITOR IN on the DXA-SLR
PURE
2) Attach the camera AV cable to the AV output on the camera.
3) Note that the camera screen will go blank when the AV cable is
plugged into a Canon camera. To view the video while monitoring
the audio you will need to use an external monitor connected to
the yellow RCA connector of the camera AV cable.
4) Connect the red and white RCA jacks on the adapter AV cable to
the corresponding red and white plugs on the camera AV cable.
5) Set the MONITOR switch to PLAY.
6) You can now play back the clip and hear the audio through your
headphones connected to PHONE output on the adapter.
Note that the playback audio may appear to have an excessive amount
of hiss. This is normal since the signal is passing through the relatively
noisy analog output of the camera. This is not representative of the
actual recorded digital file.
9