Table of Contents
Advertisement
A
B
C
D
Enter the ID number of the display in the two digit window (following figure). Entering "00" in this
window will allow all the displays in the daisy chain to receive the command. This may be useful when
turning the displays ON or OFF, or setting the time schedule for the video wall.
Figure 4-2
Press the SET button to select the display ID number as the display you want to send commands.
The LOCK message window will appear in all the other displays to indicate that they will not receive
any commands from the IR remote control through the External IR Sensor
Message on page
command, menu selection, or setting entered with the IR remote control will now be executed by the
selected display.
Figure 4-3
ENWW
Menu Setting
Monitor ID
IR Daisy Chain Monitor ID
Set Button
Exit Button
Identify the display to control
33). The On-Screen Display Menu will appear in the display selected. Any
IR Lock Message
Function
ID number assigned to the display in the SET MONITOR ID Dialog
Enter the ID number of the display you want to receive the IR
commands or enter "00" to control all the displays simultaneously
Sets the display ID of the display you want to control and will lock
out all the other displays from receiving the commands
Exit the IR Daisy Chain dialog without setting the display ID to
receive commands
Using the On-Screen Display menu
(Figure 4-3 IR Lock
33
Advertisement
Table of Contents
