HP LD4730 User Manual page 21

1
4
To frame a single display, attach the top rail to the top of the display with three of the large (M4 x 10
mm) screws provided. The rail overlaps the bezel of the display. Attach the bottom, left, and right rails
in the same manner, leaving the two small holes at each end open.
Figure 3-10
Attach the four corner pieces with four small (M3 x 5 mm) screws each. These overlap the rails and
secure their ends.
Figure 3-11
ENWW
Attaching rails
Attaching corners
Installing the HP LD4730 Frame System (Sold Separately)
2
3
13