Table of Contents
Advertisement
2.
Put the master power switch (2) into the ON (|) position.
Figure 3-18
3.
If you will be using the VGA input for video, and you want to play the audio feed through the
external speakers, connect one end of an audio cable (sold separately) to the Audio input jack
(3) and the other end to the Line Out jack on the media player/computer.
NOTE:
connection is available on the media player/computer sound card. The Line Out on a media
player/computer is used to connect to speakers, including a built-in amplifier (AMP). For
additional instructions, refer to the sound card manual.
If the Audio Out on the media player/computer sound card has only Speaker Out, reduce the
media player/computer volume before connecting to the AUDIO port on the display.
If the Audio Out on the media player/computer sound card supports both Speaker Out and Line
Out, choose Line Out.
Figure 3-19
NOTE:
audio cable. Fit the ferrite core to the audio cable. The ferrite core needs to be separated from
the mold by 5 cm (2 in).
Figure 3-20
ENWW
Turn On Power Switch
Before connecting to the AUDIO port on the display, verify what type of Audio Out
Audio connection
The ferrite core can be used to reduce electromagnetic waves when connecting an
Using the ferrite core
5 cm
Connecting cables
17
Advertisement
Table of Contents
