Table of Contents
Advertisement
Installation
10
(for qualified installers only)
When tightened, the insides of each bracket section should be flush with each, as shown in the photos below.
Figure 13: Bottom of Section Is Flush
Figure 14: Top and Bottom of Sections Are Flush
7. Attach the 4 decorative bracket covers to the locations provided, starting at the bottom of each section,
as shown below.
Figure 15: Attaching the Decorative Cover
Figure 16: Decorative Cover Attached
The completed firepit assembly should look like that in the photo below.
Figure 17: Completed Firepit Assembly
© Travis Industries, Inc.
4110603
100-01265_000
Advertisement
Table of Contents
