Table of Contents
Advertisement
User's Manual
10
PAN/TILT ZOOM
The DVR is equipped with a built-in Pan/Tilt Zoom feature, which is only available when used in
conjunction with a compatible Pan/Tilt Dome camera.
The Pan/Tilt Zoom feature supports "Pelco D" protocol.
To access and operate the PTZ feature, follow these instructions:
1
Connect a compatible Pan/Tilt Zoom Dome camera to the CH 1 camera input.
2
Enter the Pan/Tilt Zoom mode by holding the PAN/TILT key on the DVR, or press
the Pan/Tilt button on the remote control
3
You will see a contracted screen with a blue border.
Use the Arrow keys to sideways, and ↵ Button to select whether to MOVE and
4
ZOOM the camera.
5
If you have selected MOVE, you can use all four arrow keys to Pan and Tilt in all
directions. If you selected ZOOM, use the arrow keys to Zoom IN / OUT.
Select and press ↵ on the EXIT option to escape Pan/Tilt mode.
6
NOTE:
The system automatically exits Pan/Tilt mode after 20 seconds of inactivity.
Refer to the diagram below for an illustration of Pan/Tilt Zoom mode.
MOVE
3 0 0 A l d e n R o a d • M a r k h a m • O n t a r i o • C a n a d a • L 3 R 4 C 1
t e l : ( 9 0 5 ) 9 4 6 - 8 4 7 7 •
[CH1 PAN/TILT MODE]
ZOOM
D i g i m e r g e T e c h n o l o g i e s I n c .
f a x : ( 9 0 5 ) 9 4 7 - 0 1 3 8
25
DHT 300 SERIES
FOCUS
EXIT
NTSC Version
Advertisement
Table of Contents
