Polar Electro RS300X User Manual page 15

Attaching the S1 Foot Pod to Your Shoe
To measure speed/pace and distance accurately, make sure the foot
pod is correctly positioned.
1. Detach the foot pod from the fork.
2. Loosen your shoelaces and place the fork underneath them, on
top of the tongue of your shoe. Tighten the laces.
3. Fit the front part of the foot pod (closest to the RED button) to
the fork and press from the rear. Fasten the flap. Make sure the
foot pod does not move and is aligned with your foot.
4. Once your heart rate appears on your wrist unit, turn the foot
pod on by pressing and holding the RED button on the foot pod
until the green light starts to flash.
ENGLISH
Training 15