10.1.4 Seat Numbering; 10.1.5 Cu 5905 Reply To Commands; 10.1.6 Retrieving System Status; Microphone Control - DIS DDS 5900 User Manual

Digital discussion system
Table of Contents

Advertisement

Danish Interpretation Systems

10.1.4 Seat numbering

Conference units are identified by means of a seat numbers. Each conference unit is assigned a seat number. This is 
done automatically for all conference units, when they are connected to the CU 5905. The CU 5905 WEB interface is 
used to change seat numbering. 
Seat numbers must be in the range from 1 to 65535. 

10.1.5 CU 5905 reply to commands

Generally, a command from external application is replied to by the CU. But, reply to a command is produced only if 
actions are taken by the CU due to the command. 
Example:  When  a  'mic_on'  command  results  in  a  microphone  being  turned  on,  the  CU  replies  with  a  'mic_on' 
command.  On  the  other  hand,  if  a  'mic_on'  command  does  not  lead  to  turning  on  a  microphone,  the  CU  does  not 
produce any reply. 
There can be several reasons for the CU to reject turning on a microphone: 
‐The microphone is already turned on 
‐The microphone is no longer connected to the system. 
‐Speak list is already full ('max_speakers'), and delegate interrupt is not 'on'. 

10.1.6 Retrieving system status

The  CU  supports  streaming  of  status.  When  an  external  control  application  issues  a  'mic_status'  or  'audio_status' 
command, the CU responds by sending the microphone system status. The same goes for 'audio status'. Hereby, it is 
possible for an external control application to synchronize with the CU status. 
10.2

Microphone Control

10.2.1 Commands from External Control to CU 5905

10.2.1.1
Turn on microphone
mic_on <seat no><CR> 
Instruct the CU to turn on microphone at seat_no. 
If the CU turns on the microphone, it will reply with a 'mic_on' command. And, if the microphone appeared in the 
r
equest list, it is taken out of the request list, which makes the CU issue a 'mic_request_off' command as well. 
 
10.2.1.2
Turn off microphone
mic_off <seat no><CR> 
Instruct the CU to turn off microphone at seat_no. 
I
f the CU turns off the microphone, it replies with a 'mic_off' command. 
 
User Manual DDS 5900
User Manual
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents