Connection Details - DIS DDS 5900 User Manual

Danish Interpretation Systems
9.5

Connection Details

Mains
Blue
Brown
Green/Yellow Earth (Ground)
Chain (DCS­LAN)
The DDS 5900 system uses Cat5e, Cat6 or Cat7 F/UTP
or U/FTP cables with screened R
EIA 568‐B wiring shall be used.
Important: The names of Cat5/6/7 cable type have
changed.
Old name
FTP
STP
UTP
Important: Use only F/UTP or U/FTP (screened)
cables and screened RJ45 connectors and not U/UTP
cable, which are unscreened.
How to wire a Cat5e (EIA 568‐B) cable to a RJ45 con.:
Pin Function
1 In­going + ORG/WHT
2 In­going ­ ORG
3 +48V GRN/WHT
4 0V BLU
5 0V BLU/WHT
6 +48V GRN
7 Outgoing ­ BRN/WHT
8 Outgoing + BRN
Note: If other color codes are used then the four
pairs ar e c onnected
Pair 2: Pin 1 & 2
Pair 3: Pin 3 & 6
Pair 1: Pin 4 & 5
Pair 4: Pin 7 & 8
Neutral
Live
J45 connectors.
New name
F/UTP
U/FTP
U/UTP
Connector #1 Connector #2
ORG/WHT
ORG
GRN/WHT
BLU
BLU/WHT
GRN
BRN/WHT
BRN
as follows:
User Manual DDS 5900
The phase of the pairs must be correct and the wiring
spec. as stated in Cat5e (EIA 568‐B) have to be
followed.
Note: Cat6 and Cat7 cables can normally only be
terminated in sockets (female) and not in abl plugs.
Cat6 and Cat7 can thus only be used for feeding
cables terminating in wall outlets or patch panels.
Analog Audio Out
XLR3 male
Pin Signal
1 Earth
2 Signal +
3 Signal –
Analog Audio In
XLR3 female
Pin Signal
1 Earth
2 Signal +
3 Signal –
Emergency switch
Terminal block
Connect the emergency switch to pin 1 and 2.
User Manual
c e
Cable type
2 x 0.25 mm2 shielded.
Cable type
2 x 0.25 mm2 shielded.
43