DIS DDS 5900 User Manual page 27

Danish Interpretation Systems
# Menu
7.
Settings
User Manual DDS 5900
User Manual
Description
Audio Outpu – t
The 'Source' can be selected for
each of the four outputs. The
choices using the dropdown menu
are:
Group, Floor, Ch.1 or Ch.2
When 'Group' is selected for 'Out A',
the 'Group A' is the source and
similar for the three other outputs.
The 'Floor, Ch.1, Ch.2' selection is
used either for recording of the
interpreted languages
connection to a wireless language
distribution system.
If 'Floor, Ch.1, Ch.2' is selected for
an output (Out A, B, C or D) the
corresponding group is disabled in
the 'Group Setup'
Grou Setup – p
The conference units can be
assigned individually
groups.
'Group A' is always used as the
source to the built‐in loudspeakers.
A unit can be selected in 'Group A'
and/or in one of the other three
groups. If a unit is not selected in
'Group A' the audio from this unit
will not be available in the built‐in
loud eakers. sp
The 'Group' facility is used if
separate microphones are required
to be recorded or if external
equalisation or volume control is
required.
Note: A microphone can only be
present in 'Group A' and in one
other group.
or for
to four
27