Download  Print this page

Setting The Clock - Kenmore Double Oven Range Use & Care Manual

Hide thumbs

Advertisement

Table of Contents

Setting the Clock

Setting the Clock
The
pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset
at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been
interrupted, the time in the display will flash.
Press
. The display will stop flashing.
To set the clock (example below for 1:30)
1.
Press
. "CLO" will appear in the display (Fig. 1).
1 3 0
2. Press
pads to set the time of day to 1:30 (Fig. 2). Press
The time of day will appear in the display (Fig. 3).
Changing between 12 or 24 hour time of day display
1.
Press and hold
for 7 seconds until "12Hr" or "24Hr" appears in
the display.
2. Press
to switch between the 12 and 24 hour time of day display.
The display will show either "12Hr" (Fig. 4) or "24Hr" (Fig. 5).
3. Press
to accept the change or press
4. Reset the correct time as described in To set the Clock above. Please
note that if the 24 hour time of day mode was chosen, the clock will
now display time from 0:00 through 23:59 hours.
INSTRUCTIONS
.
to reject the change.
16
PRESS
1 3 0
for 7 seconds
or press
DISPLAy
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

318205213a1107Elite double oven range