CyberPower PowerPanel User Manual page 43

Notify
The administrator can be notified when an event occurs. See Event Action/Notification Recipient page for
more details about the notification methods and recipient assignment.
Initiated: Determines whether to send a notification or not and sets the notification delay. If the event is
cleared within the notification delay, the notification of the occurrence and the event cleared notification
will not be sent.
Repeat: Determines whether to send one additional notification after the initial notification. Only events
which are of severe-level and warning-level type support a repeat notification.
Command
A command will be executed when an event occurs.
Initiated: Determines whether to execute a command and sets the delay for the command execution. If
the event is cleared within the command execution delay, the command for this event and the
corresponding event will not be executed.
Duration: Sets the estimated time for the command to complete. If the event requires the computer to
shut down, this delay provides time for commands and scripted actions to complete before the shutdown
is initiated.
File: Sets a command file to be executed when an event occurs. Shell scripts for the command file uses
"cmd" as the filename extension. For more information about shell scripts read the detailed description in
the "default.cmd" file in the "extcmd" folder in the PowerPanel
Customized shell scripts must be saved in the "extcmd" folder in the PowerPanel Business Edition
installation directory. The command file will be listed on the Command/File list and can be executed
actually when the power event occurs.
Note: The command file name will be displayed in italics if the command file which had used cannot be
found in the "extcmd" folder.
Shutdown
Initiate a shutdown sequence when an event occurs. A shutdown sequence is only initiated by events which
are of severe-level and warning-level type.
Initiated: Determines whether to request the computer to be shut down and the delay before initiating
the shutdown sequence. The shutdown will be canceled if the event is cleared during this delay time. The
minimum delay time to initiate shut down is based on the time set for the execution of the other actions to
complete. This includes the notify delay time, command delay time and command execution time.
As
PowerPanel™ Business Edition
®
Business Edition installation directory.
42