Load - CyberPower PowerPanel User Manual

Load

The UPS supplies power to connected equipment, servers and computers. PowerPanel
Client can be installed on servers and computers in order to ensure a proper shutdown in the event the UPS
batteries are depleted before the power problem is resolved. The UPS/Load page provides detailed
information about the load and connected equipment.
Users can manage connected loads and outlets from the Load Management page. All connected equipment
and computers can be listed with detailed information including the name, location, contact, and what type of
outlet the equipment is plugged into.
Agent computer is the default computer which is added into the list and can't be removed from the list. Users
can only modify the name, location, contact and assign the outlet.
Add a new Client computer: Click the New Equipment link to add a new piece of equipment to the list.
If the equipment has installed PowerPanel
installed option and enter the Client computer's IP address. Click the Add button to finish adding the new
equipment. After the communication with the Client computer is established, the information such as the
name, location, contact, and connected outlet will be obtained from the remote Client computer.
Note: The Client computer is a remote computer which has PowerPanel
UPS/Load page
®
Business Edition Client, click Yes on the PowerPanel
PowerPanel™ Business Edition
®
Business Edition
®
Business Edition Client
32