Configuration - CyberPower PowerPanel User Manual

Configuration

In order for the Client to operate properly, the correct network address of UPS RMCARD, PDU or Agent
must be assigned for the outlet. The
UPS RMCARD, PDU or Agent and outlet setup:
Device Network Address
In order to establish communication between the Client and the UPS /PDU, the IP address of the UPS
RMCARD/PDU/Agent must be configured in the Client.
Address: Assigns the network address of the UPS RMCARD/PDU/Agent. Enter the IP address or use
the pull down to show the device list and select a device address from the list. Clicking the refresh button
(the icon with the rotating arrow) forces the Client to search the local network for all UPS/PUD and
update the results in the device list. Click the Apply button to establish communication with the
UPS/PDU. The Client searches the device with the least uptime to be a default UPS/PDU after an
installation. Change to another device if the default one is not supplying power to the Client computer.
page is used to configure the network address of
Power/Configuration
Power/Configuration page
PowerPanel™ Business Edition
37