Installation On Vmware Esx/Esxi 4 - CyberPower PowerPanel User Manual

Click the Finish button to complete the installation.
Note: The Linux installation will be also initiated by using the ./setup -c command.in text mode. The detailed
installation steps are described in Installation on VMWare ESX/ESXi 4 section.

Installation on VMWare ESX/ESXi 4

On VMWare ESX/ESXi, users may mount CD by using the mount command. Run mount /dev/scd0
/mnt/cdrom as a root user. /dev/scd0 is the CD drive and /mnt/cdrom will be the mount point.
Browse to the CD drive and find the installer named setup.sh in the /software/linux folder. The installer is
used to install the Client and requires root permission. The installation wizard will guide users to complete
the installation. Double click setup.sh or run the ./setup.sh command to initiate an installation procedure.
The installation procedure will be initiated as following steps:
Press Enter to start an installation.
PowerPanel™ Business Edition
13