Event Action; Events - CyberPower PowerPanel User Manual

PowerPanel™ Business Edition

Event Action

®
An event is generated when the UPS/PDU has power conditions occurred. The PowerPanel Business
Edition software can be configured to respond to specific events and perform actions based on the event.
These actions include notification, command execution and computer shutdown.

Events

®
When an event occurs, PowerPanel Business Edition software can notify administrators, execute a
command and initiate a computer shutdown sequence. The Event Action/Events page lists events and the
action settings for the events. The severity of each event is marked by a symbol. Severe level ( ) indicates
users must be alerted and the computer shut down to avoid an improper shutdown. Warning level ( )
indicates a warning and users should be notified when it occurs. If a warning condition persists, a system
shutdown may be imminent. Information level ( ) indicates the state of the UPS or that the utility power
condition has changed.
Event Action/Events page in the Agent
After selecting an event, the event will become configurable. Configure all of the action settings for the
selected event and apply to save the settings.
The clicked event item will be configurable.
Use these parameters to configure actions for individual events:
41