Water Dispenser; Inserting The Water Dispenser; Removing The Water Dispenser - Saeco Energica Focus HD8852 User Manual

WATER DISPENSER

Inserting the water dispenser

1
Slightly tilt the water dispenser and then insert it in into the guides in
the machine.
At this stage the dispensing spout holes (A) are lower than the couplings
C
(C). The dispensing spout pins are located at the same height as the guides.
A
2 Push the water dispenser towards the bottom while rotating at the
same time, until it is locked in the machine as shown in the fi gure.
Caution:
Do not use force while inserting the dispenser.

Removing the water dispenser

Warning:
Danger of scalding! Dispensing may be preceded by short sprays
of hot water and steam. Risk of burning. Wait until the end of the
brewing or cleaning cycle before removing the water dispenser.
1 Press the button on the bottom of the water dispenser to unlock it and
lift it slightly.
2
Pull the water dispenser to remove it.
ENGLISH
29 29