Table of Contents
Advertisement
6.7
Light coffee dispensing
This type of dispensing is performed by utilising doses of pre-ground
coffee manually introduced into the machine through the pre-ground
coffee slot (ref. 6, fig. 1). To the quantity thus provided manually
the machine autonomously adds a small dose of ground coffee;
this procedure compensates for the lesser quantity of ground cof-
fee present in the pre-packaged bags and improves the organoleptic
qualities of the drink dispensed.
-
Briefly press (less than 1 sec.), the key
tively, the display will show "LIGHT COFFEE";
-
introduce through the pre-ground coffee slot (ref. 6, fig. 1), the
contents of one dose of pre-ground coffee;
-
press key
or
.
N.B.: Dispensing with pre-ground coffee is programmable only
for one dose.
6.8
Dispensing coffee in jug
This function allows the dispensing of more coffees (programma-
ble) in a single container (such as a jug).
By pressing key
1 to 8 times, as many consecutive dispensing
instances as requested, up to a maximum of 2,5 litres of coffee.
-
Position the jug under the dispenser (ref. 21, fig. 1).
-
Briefly press (less than 1 sec.) key
the number of instances to be dispensed.
The display will show "JUG X ..." with the number of pro-
grammed dispensing instances;
-
press key
to confirm and start the cycle;
-
the machine will supply the dispensing instances programmed
and the display will show the icon of a jug being filled with the
number of instances already dispensed.
-
having completed the dispensing, the display will show again
"READY FOR USE";
-
if the cycle has to be stopped before the preset time it will be
sufficient to either press the jug key or any coffee keys.
N.B.: Once the desired quantity has been set, it must be con-
firmed by pressing the
button within 10 seconds, otherwise
data are not saved.
N.B.: The electronic control of the machine automatically man-
ages the double coffee dispensing cycle to reduce to the minimum
the time taken.
Example: by programming 5 dispensing instances, the electronic
control will set up dispensing for 2 double coffees plus a single one.
N.B.: Warning: after 1 jug dispensing at full dosage (approx. 2
litres) it is necessary to pause for 2 minutes to allow the machine
standard conditions restoration.
twice and consecu-
for as many times as
6.9
Hot water dispenser (LUXE version)
This function allows multiple (programmable) dispensing of hot water
in a single container.
By pressing 1 to 8 times key
uous dispensing instances will be obtained, up to a maximum of 1
litre of hot water in the same container.
-
Position the container under spout (ref. 11, fig. 1).
-
Briefly press (less than 1 sec.), multiple times, key
ing to the number of desired dispensing instances.
The display will show "HOT WATER X ..." with the number
of programmed dispensing instances;
-
press key
to confirm and start the cycle;
-
the machine will supply the dispensing instances programmed
and the display will show the icon of a container being filled
with the number of instances already dispensed.
-
having completed the dispensing, the display will show again
"READY FOR USE";
N.B.: Once the desired quantity has been set, it must be con-
firmed by pressing the
data are not saved.
N.B.: It is possible to dispense a programmed dose of hot water
only when function "HOT WATER PROGRAMM." is in "ON"
mode (see "6.14 Menu-programmable functions");
If instead the function is "OFF", the dispensing must be stopped
by pressing again key
.
Danger of burns
Never direct the hot water jet towards body parts. Direct the
pipe only by moving it through the special rubber heat pro-
tector (ref. 9, fig. 1).
It is furthermore advisable to keep the spout submerged within
the container.
Steam dispenser (LUXE version)
6.10
Submerge the spout (ref.16, fig. 1) within the liquid to be warmed
up and rotate the knob (ref. 12, fig. 1) anti-clockwise.
After having reached the desired temperature close the knob again
by rotating it clockwise.
Danger of burns
Never aim the steam jet towards body parts. Direct the pipe only
by moving it through its rubber heat protector (ref. 14, fig. 1).
It is advisable to keep the spout submerged within the container.
Important
After each usage always clean the traces of the heated drink
from the spout with a moist cloth.
as many consecutive and contin-
button within 10 seconds, otherwise
English
accord-
11
Hide quick links:
Advertisement
Table of Contents
