Scansonic R3 User Manual page 5

01 Display
02 Speaker
03
Alarm
04 Snooze
05 Sleep
06 Mode
07 Info
08 Preset 1-4
09 Power/dimmer
10 Tune
11 Volume-
12 Volume+
13
Keylock
14 Aux in
15 Line out
16 Headphones
17 12v DC
18 Antenna
19 Porttube
OLED display is showing all information on the radio
3" fullrange loudspeaker
Alarm control and settings
Press to snooze 5 minutes
Sleep timer control and settings
Press to select DAB radio, FM radio or AUX input
In DAB mode: Press to select information shown on the display: Signal
strength, Date, Genre, Data speed, Radio text, Station frequency and
Station provider
In FM mode: Press to select information shown on the display: Station
frequency, Radio text, Genre, Date
Press and hold for setting station as preset1
Press and hold to turn on or switch off radio. To dim the light in the
display press button, there are 7 steps.
Press for station scanning in DAB mode and autotune in FM mode
Press to decrease volume
Press to increase the volume
Kensington lock to prevent from theft
Connect a stereo or mono audio source ( like iPod, MP3-player, TV or
CD-player ) to this stereo input. Use 3,5mm jack to connect devices to
the radio.
This radio can be used as a separate stereotuner by connecting it to an
stereoamplifier. Use 3,5mm jack to connect the radio to amplifier
Connect a separate stereoheadset to this input to listen to the radio with
headset. Inserting a headset will turn off the main speaker
Use this input to the Scansonic R3 DC power supply
The radio comes with a telescope antenna. To improve FM reception,
adjust the antenna for best reception. The telescope antenna can be
detached with the tool included in the giftbox so a coaxial antenna cable
or outdoor antenna can be connected to this connector
Bass reflex porttube for better sound quality
3
5