Scansonic R3 User Manual page 10

S le e p t i me r
The radio has a sleep timer function that allows your radio to shut off automatically after a selected
number of minutes.
01 Press SLEEP button to check status of sleep function.
02 Press SLEEP button for 2 seconds to start sleep setting.
03 ON/OFF is now flashing – turn ROTARY knob and press to select ON or OFF sleep function.
04 If sleep ON is selected, the MINUTE is now flashing – turn and press ROTARY knob to choose
and select the desired minutes.
05 Longest sleep time is 90 minutes, shortest sleep time is 15 minutes.
06
Press SLEEP button to check status of sleep function.
Manual tuning, system reset and advanced display functions
Use the INFO button to select advanced display functions such as system reset and manual tuning.
01 Press and hold the INFO button about 2 seconds to enter the advanced display mode.
02 Press ROTARY knob to enter manual tuning.
03 Press INFO button again to reset the system – after reset a QUICK SCAN will start finding the
stations.
04 Press INFO button again and the software version appear on the display
– this is only for information and for your reference.
05
Press INFO button again and you will enter the normal INFO button functions.
10
3