Step 5 - Adjust the Skew Angle
Once you have determined the proper skew angle, follow the steps
below to adjust the antenna's LNB skew angle.
To avoid bodily injury, be sure to turn off the antenna and
disconnect power to all wired components.
1. Turn off the antenna and disconnect power to all wired
components.
2. Using a Phillips-head screwdriver, remove the screws
securing the radome. Then remove the radome and set
it aside in a safe place.
3. Locate the LNB assembly on the back of the antenna
reflector.
Figure 3-8 Location of LNB on Back of Antenna Reflector
CAUTION
Reflector
LNB
Assembly
TracVision M5/M7 User's Guide
Chapter 3 - Settings
33